PRDATR Report post Posted February 4, 2016 Asking this for another shooter. Will the mag assembly from a standard Savage 111 interchange with one from a Longrange Hunter! Share this post Link to post Share on other sites
L Cazador Report post Posted February 4, 2016 Asking this for another shooter. Will the mag assembly from a standard Savage 111 interchange with one from a Longrange Hunter! A call to Savage arms would be the helpful way to go on your question. Share this post Link to post Share on other sites
PRDATR Report post Posted February 4, 2016 Asking this for another shooter. Will the mag assembly from a standard Savage 111 interchange with one from a Longrange Hunter! A call to Savage arms would be the helpful way to go on your question. That is what I also suggested to him. Share this post Link to post Share on other sites
STOMP442 Report post Posted February 4, 2016 Yes, they should interchange but if I remember correctly the long range hunter has metal magazine frame and mag box while the standard model 111 will more than likely be plastic. Depends on what particular model of 111 as they made them both ways. You can order either plastic or metal magazine frame and box from Savage. He will need to get a liability release form from Savage before they will sell him the parts. The plastic frame and assembly runs around $26 while the metal assembly runs about $100 more than that if I remember correctly. Check over on the Savage Shooters forum under the FAQ page for part numbers and serial numbers for each model you are looking at. Share this post Link to post Share on other sites
