Flatlander Report post Posted September 2, 2014 No tags which hunt do you have? Share this post Link to post Share on other sites
elkiny Report post Posted September 10, 2014 Hello flatlander, I have gone thru a similar situation and my problem turned out to be the scope. Leopolds are solid so I would highly doubt that your scope is bad but maybe you got a lemon. I would eliminate that 1st and while replacing the scope check your mount and rings (l have a hunch it's your mount or rings). Like a previous poster mentioned that MLs have a way of wiggling loose screws. I normally shoot 100 grains/2 pellets, I find it more accurate. I too have a TC Prohunter (just like the one pictured) except I use a pistol primer in a 25 acp casing, trigger is lightened too. It's a tack driver tho, you are welcome to use it too. Pm me if interested. Share this post Link to post Share on other sites
sjvcon Report post Posted September 20, 2014 If your gun still has the open sights try shooting with those. If you at least get a group you know it's the scope. Personally have never been a fan of the 150 grain loads. 100 grain has always been better for me. +1. I remember reading some things about 150 grains being too much for most ML's ... though that may have changed in the past couple of years. Share this post Link to post Share on other sites
Flatlander Report post Posted September 20, 2014 Thanks guys, I ended up getting everything dialed in and had a VERY successful antelope hunt. I could not have done it without the help and support of CWT members. Below is a link to the thread with pics. http://www.coueswhitetail.com/forums/topic/49806-monster-goat-in-the-dirt-2014-antelope-hunt/ Share this post Link to post Share on other sites
az_shooter Report post Posted October 2, 2014 I know nothing of ML but I hope you get it figured out, I would be freaking out to. Share this post Link to post Share on other sites
