Trailer water pump

[firstcoueswas80]

Looks like my water pump is starting to go. Pumping slower, noiseir etc.

The factory one (5503-4v15-b636) is old and info on it/direct replacement is hard to find.

 

In my mind, "any" pump that works off of 12v, is of similar PSI/GPM should work.

Can anyone point me in the right direction?

[5guyshunting]

1 hour ago, firstcoueswas80 said:

Looks like my water pump is starting to go. Pumping slower, noiseir etc.

The factory one (5503-4v15-b636) is old and info on it/direct replacement is hard to find.

 

In my mind, "any" pump that works off of 12v, is of similar PSI/GPM should work.

Can anyone point me in the right direction?

Shurflo !!!  or nothing.

 

 

 

[firstcoueswas80]

11 minutes ago, 5guyshunting said:

Shurflo !!!  or nothing.

 

 

 

Thats what ive read, and im happy to order one, i just dont which one.

[Flashgun]

The only differences are mainly noise and flow rates. I’d find a shurflo with similar inlet and outlet setup to your existing so you don’t have to change any plumbing and call it a day. I’d keep your old one on the trailer as an emergency spare just in case it ever goes out in a hunt

[Redman]

 my pump has a screen that can get blocked and reduce water pressure. 

any pump works that 12V or even 110 if you run it off generator. Amazon has  multiple pumps that are $50 vs $200 for pentair - some are louder than others.   I would target sone with the sam PSI - most are 45psi with a 3 GPM - but there are some that go up to 75psi

[BeardownAZ]

Shurflo. Make sure it has male threaded fittings going to female compression on the hoses. Last one had female quick connect and has a tendency to leak. Also what Redman said about the screen prefilter.