DesertBull Report post Posted September 18, 2014 Pretty simple and slick design http://www.jaracal.com/viewtopic.php?f=75&t=33302&start=25#p407548 Share this post Link to post Share on other sites
Titanium700 Report post Posted September 21, 2014 That IS a pretty slick idea. Share this post Link to post Share on other sites
HuntHarder Report post Posted September 22, 2014 Nice. I have never annealed my brass. Do many of you use an annealing machine? Share this post Link to post Share on other sites
ruffcountry Report post Posted September 22, 2014 pretty easy to just hold the brass at the base in your fingers and when it gets too hot to hold then you let go it will increase life of brass Share this post Link to post Share on other sites
Titanium700 Report post Posted September 22, 2014 I anneal often, I do it with my fingers....once it gets too hot I let it go. I have to anneal my .243AI brass often. Share this post Link to post Share on other sites
HuntHarder Report post Posted September 22, 2014 I just read up on annealing and it appears it is pretty popular. Should I do it after every reloading or only after the brass has been shot more than twice? The finger tip method seems like it might be the way to go. Share this post Link to post Share on other sites
MULEPACKHUNTER Report post Posted September 22, 2014 I go 4 loads on my brass before anneal. I do my 30-30 after 2 loads because they are tougher to size. I usually do my 556 while one of my buddies reloading and we have the tunes cranked so its not alot of labor. Share this post Link to post Share on other sites
