Hunter4Life09 Report post Posted April 10, 2015 Ok I'm throwing some ideas around and I was wondering if a barrel off a Remington sendero would fit on a factory Remington 700? Share this post Link to post Share on other sites
sherman Report post Posted April 10, 2015 I am not an expert but I think it would thread right on to it. Share this post Link to post Share on other sites
ctracingraptor Report post Posted April 10, 2015 I have a sendero and im pretty sure it will fit, minus it's a .820 bull barrel and it wont fit your stock.... If you want to upgrade your barrel on your 700, you have alot of options.... Share this post Link to post Share on other sites
lancetkenyon Report post Posted April 10, 2015 Should fit, but you will need a gunsmith to do it unless you have experience. Need to open up the stock to fit the bigger profile barrel, and definitely need to check headspacing once it is spun on to ensure safe shooting conditions. Also, make sure the bolt face matches between your old cartridge and new one if it is not the same round being used. Share this post Link to post Share on other sites
Big Browns Report post Posted April 10, 2015 Unless you get the barrel for free I would not spend the money to have the barrel put on your gun. You can get a lot better barrels for your 700. Share this post Link to post Share on other sites
Hunter4Life09 Report post Posted April 10, 2015 Thanks for the info fellas Share this post Link to post Share on other sites
