Jump to content

Recommended Posts

10 minutes ago, Demerson71 said:

Yeh, I don’t understand how people are getting 58+ of imr 4350. I just put in 50 just to see and it’s almost full. 

A quick peek at one of my reloading manuals show 7-08's Max load of IMR 4350 between 44 and 50 gr, depending on the weight of the projectile. 

Share this post


Link to post
Share on other sites
1 minute ago, Couesdeer said:

A quick peek at one of my reloading manuals show 7-08's Max load of IMR 4350 between 44 and 50 gr, depending on the weight of the projectile. 

Thx for reply, I see 43.7-46.5(c) on modern reloading (2nd Ed). Now that I look at Hodgdon site, it says same thing. 

  • Like 1

Share this post


Link to post
Share on other sites

Started this thread and asked this question quite a while ago. I ended up treating it like a 7mm-08 and shot 140's and 150's out of it. The rifle shoots great with 140 Sierra SBT's and 150 Eldx's. The rifle is topped with a Burris XTR 4-20x50 and changed out the muzzle brake to a Patriot Arms Brake. Haven't shot it in quite some time and it's actually for sale in the classified's. I used H4350 for both bullets and speeds and accuracy from an inexpensive rifle is pretty impressive. I believe the loads were 46.5gr for the 140's and 46.0 for the 150's with RP brass, and Fed 210 primers.  

Share this post


Link to post
Share on other sites
13 minutes ago, grapevinedave said:

Started this thread and asked this question quite a while ago. I ended up treating it like a 7mm-08 and shot 140's and 150's out of it. The rifle shoots great with 140 Sierra SBT's and 150 Eldx's. The rifle is topped with a Burris XTR 4-20x50 and changed out the muzzle brake to a Patriot Arms Brake. Haven't shot it in quite some time and it's actually for sale in the classified's. I used H4350 for both bullets and speeds and accuracy from an inexpensive rifle is pretty impressive. I believe the loads were 46.5gr for the 140's and 46.0 for the 150's with RP brass, and Fed 210 primers.  

Thx for reply, I’m done with the bigger bullets. I even tried vibrating the powder down and only got to 2.833. With my last 3 pieces of brass I did the Sierra 140 GKs w 39.5 H4895. I should stick in that area. I didn’t even know before looking in a book that the 08 went passed 150. 

Share this post


Link to post
Share on other sites
10 hours ago, Demerson71 said:

Thx for reply, I’m done with the bigger bullets. I even tried vibrating the powder down and only got to 2.833. With my last 3 pieces of brass I did the Sierra 140 GKs w 39.5 H4895. I should stick in that area. I didn’t even know before looking in a book that the 08 went passed 150. 

I shot 168 HPBT Sierra's in my 700. Knocked down steel Rams at 500 Meters just fine. I believe they were around 2650fps.

Share this post


Link to post
Share on other sites
4 hours ago, Demerson71 said:

What was your OAL? 

I don't recall. The rifle had been converted to single feed and a few thousands of the lands as it was strictly used for competition.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×