Weatherby 257 magnum 80 grain Barnes TTSX for coues?

[HuntHarder]

Take Firstcoues up on his offer. Reloading is labor intensive, but the results speak for themselves. Great offer Firstcoueswas80!!

[Hoss50]

I make all my 257 Weatherby cases from 7mm Rem Mag or .264 Win Mag cases. You have to fire form the first load but it is much cheaper to make the brass then pay for Weatherby or anyone else. You don't have quite the case capacity but have not had any issues doing it and the cases are a little short but they work fine. I am getting about 5-8 loadings per case before the primer pockets get loose.

 

I have shot both 100gr & 115gr and they both shoot well. My rifle seems to like the 115-117gr the best so I stick with those. I have only been able to try ranges out to about 500 yards but they fly well to that range and I would eventually like to try farther when I can.

 

As far as presses I use an RCBS Rock Chucker and it has been great. It is not fast but if you do good batches it is productive and saves tons of money over factory. I have never fired a factory round through either of my Weatherby caliber rifles. I just with brass for the 257 was as easy and cheap to find as the 300 is/was.

[roninflag]

while some may be slightly little better than others; I bet Most of the bullets from 80 to 120 grains would be awesome for coues out of a 257 wm.

[dpr64]

Firstcoueswas80, I might just do that.... What area are in ? PM if you wish..

Thanks..

[firstcoueswas80]

I'm in Tucson/Marana.

 

I've got allot of experience with the 257 & ttsx combo.

[dpr64]

Heck, you're down the street from me! I am in Oro Valley. I need some range time with the rifle next week and then I will know what I might want to do...

Thanks!

[firstcoueswas80]

Do yourself a favor see if you can find a box of the weatherby accubond loaded ammo.

[dpr64]

How do you feel about the Nosler Trophy Grade branded 110 accubond vs. the Weatherby branded 110 accubond?

Thanks!

[firstcoueswas80]

Same same. Which ever is the best price.

[dpr64]

I was on Nosler's website and they said they use Nosler brass in 'most' cases.. Would Nosler brass be as good as Weatherby brass or ?

Thanks for the help, normally I would not be so investigative on ammo but being that it is $60-$90 a box, I am trying to choose wisely...

[dse]

Midway has weatherby factory ammo with 100 gr norma bullets on clearance for $32 a box. Its like $10 cheaper than they want for just brass.

[firstcoueswas80]

Nosler brass is usually just fine

[cohntr6]

Thats a good deal, just for the brass!!!