AverageJoe Report post Posted October 29, 2015 Curious how many different yardages / moa we will all come up with with the following data. I have seen a big discrepancy between the differnet apps and software. Post your 650 yd results in moa and inches of drop -.308 180 gn accubond . factory bc of .507 -2900 fps -100 yd zero -5500 ft elevation -60 degrees -60 percent humidity -site height 1.5" Share this post Link to post Share on other sites
STOMP442 Report post Posted October 29, 2015 Using the older Berger Bullet calculator I am getting 13.3 MOA / 90.50" of drop at 650 Yards using the above-listed conditions. Share this post Link to post Share on other sites
oz31p Report post Posted October 29, 2015 93.3 inches of drop 14.3 Moa Via shooter Share this post Link to post Share on other sites
AverageJoe Report post Posted October 29, 2015 Using isnipe i get two different answers depending on which time i log on lol. 13.25 moa and 13.38 moa. Share this post Link to post Share on other sites
AverageJoe Report post Posted October 29, 2015 Using jbm ballistic i get 13.6 moa Share this post Link to post Share on other sites
Big Browns Report post Posted October 29, 2015 Very interesting! Great idea to compare the different apps........ 1 Share this post Link to post Share on other sites
trphyhntr Report post Posted October 29, 2015 and We wonder why We hear people shoot 10 times 3 Share this post Link to post Share on other sites
Big Browns Report post Posted October 29, 2015 and We wonder why We hear people shoot 10 times I wish more people understood the EXTREME importance of verifying their balistic data in real world hunting situations. Almost all balistic calculators will need to be tweeked a little or a lot. 6 Share this post Link to post Share on other sites
AverageJoe Report post Posted October 29, 2015 So just based on the limited responses so far we have more than 1 moa of deviation. At 650 yds that is almost 7" off. Share this post Link to post Share on other sites
HuntHarder Report post Posted October 29, 2015 13.2 MOA OR 90" With hornady Share this post Link to post Share on other sites
STOMP442 Report post Posted October 29, 2015 So just based on the limited responses so far we have more than 1 moa of deviation. At 650 yds that is almost 7" off. This is why I use an app to get me close and why I always shoot from 200 yards to 1000 in varying conditions to verify what my rifle is actually doing. Nothing beats actual shot and recorded data. 2 Share this post Link to post Share on other sites
trphyhntr Report post Posted October 29, 2015 86.9" 12.8 moa Share this post Link to post Share on other sites
coueser4 Report post Posted October 30, 2015 Using the applied ballistics calculator and using the g7 ballistics of that bullet as well as a 1 in 10 twist barrel I got this. 13.65 moa 92.91" of drop Using the factory G1 BC you posted I got this. 13.5 moa 91.90" of drop Pretty interesting to see the variations. Totally agree with verifying data by shooting these ranges. GSeven has a calculator that you can use then you also input your results after shooting at the range and it gives you a "true muzzle velocity" that helps match your actual drop curve. Just in case you weren't aware of that already. 1 Share this post Link to post Share on other sites
rcdinaz Report post Posted October 30, 2015 I got slightly different on Shooter but very close and did notice if I play with turning on and off Coriolis and spin drift it changes 3-4 inches and 0.1 MOA. G7 vs G1 is obviously a little different even as a starting place. A few other variables available as well depending on the program. I agree with all of the other assessment, you gotta shoot it at some point! Share this post Link to post Share on other sites
DesertBull Report post Posted October 30, 2015 I got 13.1 MOA using LITZ BC, 29.5" for barometric pressure and the 5500' elevation. Share this post Link to post Share on other sites
