azpredator@work Report post Posted October 11, 2016 My rifle is currently at Phoenix Custom Rifles getting a new muzzle brake installed. Would it be beneficial to have them bed my rifle while it's there? When do you know you need to bed a rifle? Is there any drawbacks to bedding a rifle? sako 85 finnlite 300 wsm Thanks for the help, Wade Share this post Link to post Share on other sites
Shedhunteraz Report post Posted October 11, 2016 i wouldnt take a BB gun to them. Get ahold of spedygoss on here. 1 Share this post Link to post Share on other sites
STOMP442 Report post Posted October 11, 2016 I always recommend bedding. When done correctly it never hurts and almost always improves a rifles accuracy. When tuning up a rifle I never want to wonder if there was something I could have done to squeak out that extra little bit of accuracy. Bedding, floating the barrel and brass prep including sorting by case volume ensures your rifle is running at its peak potential. If you are one of those guys that think hitting a paper plate at 100 yards is good enough bedding probably won't gain you anything. But if you are trying to maximize your rifles potential then bedding is an important step. 1 Share this post Link to post Share on other sites
Saguaro Report post Posted October 11, 2016 Bedding is positive. Now is the time since your rifle is taken apart. Go for it. Share this post Link to post Share on other sites
muledeerarea33? Report post Posted October 12, 2016 Depends on what they charge. Share this post Link to post Share on other sites
azgutpile Report post Posted October 12, 2016 I say it depends on the stock your bedding. If it is ridged enough and will the bedding compound stick to it. Share this post Link to post Share on other sites
cjl2010 Report post Posted October 12, 2016 Dang it lance... what's next years plan? Share this post Link to post Share on other sites
dse Report post Posted October 12, 2016 I'll second what Lance had to say on PCR. I've only had one built there but a second is in the works. Share this post Link to post Share on other sites
cjl2010 Report post Posted October 12, 2016 My goodness!!! That should be sweet!!! I've got a model 7 sitting here that's going to be chambered in either of those. As always please create a thread on the progress!! Share this post Link to post Share on other sites
sjvcon Report post Posted October 12, 2016 I'm interested to know why someone says they wouldn't take a BB gun to them??? Bad experience? I had a rifle bedded by them. They did a great job on it. Mauser action, so a little harder to work with and he took the time to bed both the action and the bottom metal so they are perfectly seated. 1 Share this post Link to post Share on other sites
trphyhntr Report post Posted October 12, 2016 i wouldnt take a BB gun to them. Get ahold of spedygoss on here. Why? Share this post Link to post Share on other sites
SO I HUNT Report post Posted October 12, 2016 So did buy a March scope? We talked earlier this year about them... Next year, once I pay off a credit card for some medical bills my wife incurred, will be a short barreled (20-22") lightweight short action deer/elk mountain medium range (600-700 yard) hunting rifle in 7RSAUM or 6.5 4S. R700 or custom short action Proof Research or Bartlein #3 fluted barrel 1:9" for 7mm, 1:8" for the 6.5mm twist (still undecided on Proof and if I can get one that short) McMillan Hunter's Edge or Manners MCS EH-1 stock Timney 510 Seekins 20MOA rail and rings (both alloys) March 3-24x52 FFP FML-1 I will be looking at the 168 HVLD for the 7mm, or was hoping for the 150-160 Matrix in the 6.5, but Matrix just sold to a Canadian company, so not sure what they will do in the future. Next year, once I pay off a credit card for some medical bills my wife incurred, will be a short barreled (20-22") lightweight short action deer/elk mountain medium range (600-700 yard) hunting rifle in 7RSAUM or 6.5 4S. R700 or custom short action Proof Research or Bartlein #3 fluted barrel 1:9" for 7mm, 1:8" for the 6.5mm twist (still undecided on Proof and if I can get one that short) McMillan Hunter's Edge or Manners MCS EH-1 stock Timney 510 Seekins 20MOA rail and rings (both alloys) March 3-24x52 FFP FML-1 I will be looking at the 168 HVLD for the 7mm, or was hoping for the 150-160 Matrix in the 6.5, but Matrix just sold to a Canadian company, so not sure what they will do in the future. Share this post Link to post Share on other sites
PRDATR Report post Posted October 13, 2016 I'm interested to know why someone says they wouldn't take a BB gun to them??? Bad experience? I had a rifle bedded by them. They did a great job on it. Mauser action, so a little harder to work with and he took the time to bed both the action and the bottom metal so they are perfectly seated. They always had good reviews and came highly recommended by quite a few people. Then earlier this year there was a posted by someone who was disgruntled, and it sounded justified. Then a few people piled on. I personally have had not them do any work on my guns. Since I'm a poor working stiff. Share this post Link to post Share on other sites
WampusCat Report post Posted October 13, 2016 Definitely get it bedded if you are not comfortable doing it yourself. Why wonder if you could have gained from it while it was already there on their work bench. Next year, once I pay off a credit card for some medical bills my wife incurred, will be a short barreled (20-22") lightweight short action deer/elk mountain medium range (600-700 yard) hunting rifle in 7RSAUM or 6.5 4S.R700 or custom short actionProof Research or Bartlein #3 fluted barrel 1:9" for 7mm, 1:8" for the 6.5mm twist (still undecided on Proof and if I can get one that short)McMillan Hunter's Edge or Manners MCS EH-1 stockTimney 510Seekins 20MOA rail and rings (both alloys)March 3-24x52 FFP FML-1 Lance, I built that rifles cousin except it sports a Krieger in a Sendero contour. Hard to beat that 4S ! 1 Share this post Link to post Share on other sites
cjl2010 Report post Posted October 13, 2016 Wampus what length barrel? Share this post Link to post Share on other sites
